Problem Template Educon On Joomla 5
comunicazione.pin
Hi, if I set the Educon template as default, the website is not visible.
Template: https://www.joomshaper.com/joomla-templates/educon
To bypass the situation I had to assign the template to the individual menu pages, but even with this trick there are problems with this template, SPbuilder is not configurable at all.
Toufiq
Accepted AnswerHi there,
Thank you for reaching out, and I apologize for any inconvenience caused by this oversight. To better address the issue, could you kindly provide Joomla administrator access? This will enable me to thoroughly investigate the matter and provide you with a prompt resolution.
I appreciate your cooperation and will ensure to get back to you as soon as possible.
Best regards,
Toufiqur Rahman (Team Lead, Support)
comunicazione.pin
Accepted Answerok!
Toufiq
Accepted AnswerYou are most welcome! We appreciate your feedback and are delighted to hear that you're satisfied with our service.
To officially close this forum post, mark it as accepted. If you have any more questions or need further assistance in the future, please don't hesitate to reach out to us.
As for writing a review about our product and support quality, we would greatly appreciate it! Your feedback helps us improve and serves as a valuable reference for others. Please take a moment to share your thoughts about your experience with our product and the support you received. Your input is valuable to us and the community. Thank you in advance for your time and support.
We're here to assist you with any further questions or requests you may have. Once again, thank you for choosing our product and for being a part of our community.
Best regards,
Toufiqur Rahman
Team Lead, Tech Support (JoomShaper)
comunicazione.pin
Accepted AnswerNo, some pages don't work, we have problems with the courses template https://www.joomshaper.com/joomla-templates/educon (exemple)
https://www.pin.unifi.it/cosa-facciamo/corsi-di-formazione/corsi-in-partenza (our)
Toufiq
Accepted AnswerPlease check now. Just keep a backup of this file.
File location
templates/shaper_educon/sppagebuilder/addons/feature/site.php
comunicazione.pin
Accepted AnswerOk! Il Works, Thank you!!
Toufiq
Accepted AnswerYou are most welcome! We appreciate your feedback and are delighted to hear that you're satisfied with our service.
To officially close this forum post, mark it as accepted. If you have any more questions or need further assistance in the future, please don't hesitate to reach out to us.
As for writing a review about our product and support quality, we would greatly appreciate it! Your feedback helps us improve and serves as a valuable reference for others. Please take a moment to share your thoughts about your experience with our product and the support you received. Your input is valuable to us and the community. Thank you in advance for your time and support.
We're here to assist you with any further questions or requests you may have. Once again, thank you for choosing our product and for being a part of our community.
Best regards,
Toufiqur Rahman
Team Lead, Tech Support (JoomShaper)
comunicazione.pin
Accepted AnswerGood morning, thank you very much for yesterday's changes. Another issue remains, related to the compatibility of the PageBuilder "article" add-on with the template. If you plan to display more than 10 articles on a page, the layout won't work, and it's also impossible to have the "article" add-on coexist twice on the same page. Below is an example of the first case (which is the one that causes the most problems with existing pages). Look at the bottom of the page: https://www.pin.unifi.it/attivamente/iscrizioni-aperte https://www.pin.unifi.it/news-ed-eventi
Let me know, Best regards
comunicazione.pin
Accepted AnswerFor example, on this page (https://www.pin.unifi.it/laboratori/circulab) the article formatting was different. The option to upload new news items was gone. In the previous version, it was set so that the news items were the same size, and underneath there was a "Load old news" button.
The configuration options for the sppagebuilder article addon have been greatly reduced. Best regards
Toufiq
Accepted AnswerI’ve removed unnecessary code from your large articles. Please check them now. A few articles are still having issues, and I haven’t been able to identify the cause yet.
comunicazione.pin
Accepted AnswerI've now realized there's a very serious problem: after the change, I can't select the output of articles (PageBuilder article addon) via tags. I need to be able to manage the article addon's news via tags. Why was this feature lost? SPBuilder isn't the same anymore. I can abandon the template, since it doesn't work, but not this Article addon feature. I hope this can be resolved, because it would be a disaster!
https://drive.google.com/file/d/1zUxjMgMy98P4OO6N_xIij9TmmA41RTW1/view?usp=sharing